Name: 8805-1001 - FRONT Workhorse W-Series '01-'11 (Koni FSD)
Brand: Koni
SKU: 8805-1001
Price: 225.00 USD
Availability: InStock
Rating: 5 (7 reviews)

Best Seller

8805-1001 - FRONT Workhorse W-Series '01-'11 (Koni FSD)

: 8805-1001

In Stock(26)

Based on 7 reviews.

$225.00

$229.50

Available Options

VIN Number

Qty

Add to Cart

This product has a minimum quantity of 2

8805-1001 - FRONT Workhorse W-Series '01-'11 (Koni FSD)

Description:

Koni Frequency Selective Damping (FSD) shock absorbers provide superior handling characteristics without compromising ride comfort. The FSD is firm where you need it, such as through corners, but rides soft over expansion joints and rough roads. A special valve filters out annoying vibrations before they enter the vehicle, resulting in a smooth ride over a variety of road surfaces.

Applications:

Workhorse W20 / W21 / W22 Front (2001-2011)
Workhorse W24 Front (2004-2011)
Workhorse W16 (2006-2011) 8.1L Gas Only
Workhorse W18 (2006-2011) 8.1L Gas Only
Holiday Rambler Vacationer Diesel RSR Front (2006-2009)
Monaco LaPalma Diesel RSR Front (2006-2009)

Collapsed Length	Extended Length	Upper Mount	Lower Mount
16.65"	26.81"	Eye 3/4"	Eye 3/4"

The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

i have a Winnebago Adventurer 38t workhorse w series I need new shocks all around Koni fsd if possible.
Thanks, Rick Jones ( RICK JONES, 09/06/2023 )

We would want to verify with VIN but the part #'s you should need for a 2008 W-series is 8805-1001 for the front and 8805-1002 for the rear.

just bought the Koni 8805-1001 shocks from you for our W24, what is the torque for the 1 1/8" bolts? also will be doing rear shortly 8805-1002 need the torque there as well.
thanks ( Bill McElroy, 05/11/2021 )

The upper and lower shock mount bolts are torque to 150 lb-ft. The rear shock nuts are torque to 30 lb-ft.

Spec say I have 2009 Workhorse W16 chassis.
Tried 8805-1001, but Front and rear Shocks have eyelets on both ends.
Do you know which model is correct? ( Phillip Cain, 01/22/2021 )

Unfortunately, Koni does not make a shock for the 2009 or later W16 chassis.

Is the $160 price for one shock? ( Larry Powers, 06/03/2017 )

Hi Larry,

These Koni shocks are $160 each.

Just received these shocks last week and noticed there was no mounting hardware in boxes. ( Front ) Do you use existing rubber from the old shocks when mounting the new ones? Thanks. Garry. PS The front shock boxes had been open but the rear shock boxes were sealed.

( Garry Shaw, 03/28/2016 )

Garry,

The 8805-1001 does not require any additional hardware or bushings, they are pressed in. The only thing you will reuse is the nuts, bolts and washers.