Text Us At: 360-736-2158

Customer Service Available Monday-Friday 6am-4pm Pacific

Call: 800-417-4559
My Cart
Call: 800-417-4559

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)
8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)
8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)
8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)
8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)
: 8805-1009
In Stock(2)
Based on 0 reviews.
$215.00
$229.50

Available Options

Add to Cart
This product has a minimum quantity of 2

8805-1009 - REAR Spartan Chassis / Tiffin PowerGlide (Koni FSD)

Description:

Koni Frequency Selective Damping (FSD) shock absorbers provide superior handling characteristics without compromising ride comfort. The FSD is firm where you need it, such as through corners, but rides soft over expansion joints and rough roads. A special valve filters out annoying vibrations before they enter the vehicle, resulting in a smooth ride over a variety of road surfaces.


  • We have seen a limited number of Spartans and PowerGlides that use a 5/8" lower shock bolt instead of the standard 3/4". This can be determined by checking if an 1-1/8" wrench fits snug on the head of the lower shock bolt. If it DOES fit then you DO NOT need the bushing set, if it fits loose then you would require the bushing set.


Applications:

  • Spartan MountainMaster I-Beam (240AR) Rear
  • Spartan MountainMaster IFS up to 14K Rear
  • Spartan MountainMaster IFS 14k to 16K Rear
  • Spartan K2, K3, IFS 16K to 18K w/ Tuthill Suspension Rear
  • Tiffin Allegro Breeze 2010+ Rear
  • Tiffin Allegro Bus w/ PowerGlide Rear
  • Tiffin Phaeton w/ PowerGlide Rear


Collapsed LengthExtended LengthUpper MountLower Mount
15.08"
23.70"Eye 3/4"Eye 3/4"

Write a review

Please login or register to review

 The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

2014 Tiffin bus, 37AP… power glide chassis…can you tell me what Koni shocks to order, front and rear? ( Ellen Endicott, 01/27/2025 )
Your coach should have the ZF independent front suspension, we can verify this for you if you send a picture of the original shock. Front would be Koni 99B-3262 and rear would be 8805-1009.
I did the 1 1/8" wrench test and it was not snug. So does that mean I need the 16ea. spacers for rear shocks? The shocks for front are the 99B-3234 are this the new upgraded model? The back are 8805-1009 correct. Thanks ( rc thomas, 03/03/2024 )

Yes, if the wrench did not fit tight then you will need the spacer kit, you just need to order quantity 1 to do the lower bolt on each side. 99B-3234 is the new EVO model shock for your application.

Will an oversize Koni fit on my Spartin chassis . I have a 2019 entegra Aspire, the original buyer quickly installed larger Koni shocks on the front but not the rear. Is this a ride problem as far as porpoising is considered or maybe he did not do the rear because in just looking at the front Konis and then observing the amount of clearance between shock and the frame member it seems as a maybe fit at best for the larger Koni? I,m looking at maybe a half inch. ( John Pepper, 10/01/2022 )
Hello John, the the larger diameter Koni "90 Series" are  for front applications, primarily for Independent front suspensions, which place more leverage on the shocks and need more damping due the increased leverage. The 8805-1009's are the "FSD" design and work well on the rear application as they are "self adjusting" too give control when needed and still provide good ride quality . 
Looking for larger size shock than standard on my 2019 entegra Aspire 40 foot. More like the 60MM size, Will they fit? ( John Pepper, 09/26/2022 )
Koni 99B-3234 front and Koni 8805-1009 rear will fit your Entegra Aspire.
I have a 2013 Tiffin Phaeton 36GH. I think she requires 2ea 99B3209 shocks for the front and 2ea 8805 1009 shocks for the rear. Can you verify or correct this information? ( Bill Milman, 09/02/2022 )
Your coach will take the 8805-1020 front shocks and 8805-1022 rear shocks.

Ask a question

Note: HTML is not translated!
Captcha
Delivery Icon
Shipping Notice

In-stock items shipping via ground or flat rate are shipped within 48 hours. Expedited orders are prioritized and ship within 24 hours. Orders placed over the weekend, after Friday’s shipping cutoff, or on designated holidays will be processed on the next business day, and may not ship for up to 48 hours. For more information, please see our shipping terms.

Related Products

90-2815 - FRONT Spartan MountainMaster IFS1200 thru IFS1360 '97-'06 (Koni Adjustable)

90-2815 - FRONT Spartan MountainMaster IFS1200 thru IFS1360 '97-'06 (Koni Adjustable)

$259.00

99B-3262 - FRONT Freightliner XC Chassis ZF IFS '02-Current / 2010+ Allegro Bus w/ PowerGlide Chassis ZF IFS / Spartan K2 ZF (Koni EVO)

99B-3262 - FRONT Freightliner XC Chassis ZF IFS '02-Current / 2010+ Allegro Bus w/ PowerGlide Chassis ZF IFS / Spartan K2 ZF (Koni EVO)

$289.00

3/4-5/8-BUSH - 3/4" to 5/8" Shock Bushing Set

3/4-5/8-BUSH - 3/4" to 5/8" Shock Bushing Set

$39.24

99B-3234SP1 - FRONT *High Force* Spartan K2, K3 MountainMaster 18K+ / Tiffin Allegro Bus w/ PowerGlide Chassis Reyco IFS (Koni EVO High Force)

99B-3234SP1 - FRONT *High Force* Spartan K2, K3 MountainMaster 18K+ / Tiffin Allegro Bus w/ PowerGlide Chassis Reyco IFS (Koni EVO High Force)

$299.00

We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.
Merchant Reviews