My Cart
Manufacturer: UltraPower
Model: SPW7400
Part# SPW7400 - UltraPower 7.4L Vortec Magnum Workhorse/Chevrolet Spark Plug Wires
Description:UltraPower Magnum Spark Plug Wires are patent protected because of the unique method of producing these wires which have extremely low resistance while maintaining very high noise suppression. The ..
$179.95 $229.43
In Stock
Best Seller
Manufacturer: UltraPower
Model: SPW8100
UltraPower Magnum Spark Plug Wires are patent protected because of the unique method of producing these wires which have extremely low resistance while maintaining very high noise suppression. The benefit of this invention is that full electrical energy from the ignition source is transmitted to the..
$159.99 $202.49
In Stock
Manufacturer: UltraPower
Model: SPWEX6000
Please verify that you have the LY2/LY6 or L96 engine (short wires). If you have the longer wires (LQ4 Engine) please purchase the SPW8100 or SPWEX8100.Description:These are the mack-daddy of all spark plug wires! Never burn another wire again!UltraPower Extreme Magnum Spark Plug Wire..
$239.99 $296.93
In Stock
New
Manufacturer: UltraPower
Model: SPWEX7.3L-HTC
These are the mack-daddy of all spark plug wires! Never burn another wire again! Solid Core Stainless with Ceramic spark plug boot!UltraPower Extreme Magnum Spark Plug Wires are patent protected because of the unique method of producing these wires which have extremely low resistance while maintaini..
$375.00
In Stock
Manufacturer: UltraPower
Model: SPWEX8100
Part# SPWEX8100 UltraPower 8.1L Extreme Magnum Workhorse Spark Plug WiresDescription:These are the mack-daddy of all spark plug wires! Never burn another wire again!UltraPower Extreme Magnum Spark Plug Wires are patent protected because of the unique method of producing these wires which have e..
$285.00 $371.25
In Stock
Manufacturer: SuperSteer
Model: SS100
Special Note: This will only fit if you have a 3 bolt mounting bellcrank. If it has 4 bolts attaching it to the frame rail, then this part will not fit.Description:
Drivers of the Freightliner XC motor home chassis often experience steering play and wander. The steering play can be attribut..
$449.00 $538.65
In Stock
Manufacturer: SuperSteer
Model: SS101
Description:The SuperSteer® SS101 front sway bar is heat treated, offering a stronger alternative to the traditional sway bar upgrade. When heat is applied during manufacturing, the steel hardens and becomes stronger. At 1 3/4" diameter, it is larger than the stock sway bar. For every 1/8" sway bar ..
$1,150.00 $1,282.50
In Stock
Manufacturer: SuperSteer
Model: SS102
Description:The
SuperSteer® SS102 rear sway bar is a factory replacement. At 2" diameter,
it is larger than the OE sway bar. For every 1/8" sway bar diameter size,
you gain 30% increase in strength. A large improvement for such a small
increase. The sway bar will help eliminate sway and body rol..
$1,200.00 $1,552.50
In Stock
New
Manufacturer: SuperSteer
Model: SS200-S2RV
This product is intended for a 2018 and up S2RV chassis and allows the Safe-T-Plus hydraulic steering control unit to be installed with on-the-fly control of the center point. The Trim Unit bolts to the 41-230 Safe-T-Plus device (sold separately) and the motorhome's front axle (taking the place of t..
$765.00
Out of Stock
Manufacturer: SuperSteer
Model: SS200F/L
Description:
The SuperSteer Trim Unit provides on-the-fly control over the popular Safe-T-Plus hydraulic steering control unit. The Trim Unit bolts to the Safe-T-Plus device and the motorhome's front axle, allowing the driver to adjust trim at the flip of a switch. Simply correct the wheel in..
$675.00 $877.50
In Stock
Manufacturer: SuperSteer
Model: SS200R/M
Description:
The SuperSteer Trim Unit provides on-the-fly control over the popular Safe-T-Plus hydraulic steering control unit. The Trim Unit bolts to the Safe-T-Plus device and the motorhome's front axle, allowing the driver to adjust trim at the flip of a switch. Simply correct the wheel in t..
$675.00 $877.50
In Stock
Manufacturer: SuperSteer
Model: SS2022F
Description:Fits Ford F53 class A chassis front axle. This bolt, spacer and bracket kit allows for the mounting of four shocks on the front of the 20K-22K GVWR Ford F53 chassis.It is recommended that you ONLY use this kit with Koni FSD 8805-1018 shock absorbers. (This kit does not include shocks)INS..
$295.00 $303.75
In Stock
