Roadmaster Individual 1-1/4" Polyurethane Sway Bar Bushing without Split (Part Number 205221-00)

Polyurethane Sway Bar Bushing Upgrade, Sold Individually

This part is a replacement polyurethane bushing designed to fit Roadmaster anti-sway (stabilizer) bars with a 1-1/4″ outside diameter. This is a solid bushing so it is installed at the very ends of the sway bar instead of the center, which you will want to use the "split" version part # 205221-10 for. Can be used to replace the OEM front sway bar bushings on a 2000 or older Chevrolet P32 RV but also requires replacing the bushing clamp with part # B140.

Over time factory rubber bushings on sway bars can degrade, leading to clunking noises, looseness, and reduced stability. Part # 205221-00 lets you replace just one worn bushing without replacing the entire sway bar or full kit

Specifications:

• 1-1/4" Inside Diameter

• 2" Width

• 3" Height

Special Notes:

• If your anti-sway bar is not 1-1/4″ (some are 1-3/8″ or 1-3/4″, etc...), you’ll need the correctly sized bushing or full bushing kit instead.

• When installing polyurethane bushings, it’s common practice to apply a bit of grease or lube on the inside of the bushing so the sway bar can move smoothly inside without premature wear.