SuperSteer® Steering Bellcrank for Chevrolet and Workhorse P30/P32 Chassis (Part Number P3032)

SuperSteer® Steering Bellcrank for Chevrolet and Workhorse P30/P32 Chassis (Part Number P3032)

: P3032

In Stock(6)

Based on 4 reviews.

$275.00

$384.75

Available Options

VIN Verify Prior to Shipping

VIN Number

Qty

Add to Cart

Eliminate Steering Play on Chevy & Workhorse P30/P32 with the SuperSteer® P3032 Bell Crank

If your P30 or P32 motorhome feels like it wanders down the road, follows ruts, or requires constant correction, worn bell cranks (also called idlers) are often the culprit. The factory OEM design uses sleeve bushings that wear prematurely and cannot be adjusted to remove steering play. As they wear, side-to-side and vertical movement develops — resulting in road wander, poor returnability, and driver fatigue.

The SuperSteer® P3032 Bell Crank is a heavy-duty, precision-engineered upgrade that replaces the weak factory component with a rugged, long-lasting solution built specifically for motorhome applications.

Instead of sleeve bushings, this upgraded part utilizes high-quality tapered roller bearings. These bearings are designed to carry significantly higher loads while maintaining tight tolerances. They can also be adjusted to eliminate end play and side movement, restoring precise steering response.

Applications:

1968-1999 Chevrolet P30/P32
2000 P32 Motor Home
2001 P32 Motor Home
2002 P32 Motor Home
2003 P32 Motor Home
2004 P32 Motor Home
2005 P32 Motor Home

Specifications:

Rugged high-strength casting
Steel spindle for superior durability
Tapered roller bearings (grease-packed and sealed)
Adjustable for end and side play
Eliminates vertical and side-to-side movement

Benefits:

Reduces steering play and looseness
Improves return-to-center and steering feel
Minimizes road wander and rut tracking
Reduces driver fatigue on long trips
Helps extend tire life by maintaining proper steering control
Bolt-in direct replacement for the OEM bell crank
Limited Lifetime Warranty

Installation Instructions:

The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

I have a 1998 windsong MH with a P-32 chasis with the bellcrank design. Are the part numbers different for the left and right? Or are the bellcranks the same for either side? Also do you carry the upper control arm bushings for this vehicle? ( will adams, 09/30/2021 )

Hello,

Here are the part #'s for the Bellcranks and the Upper Control Arm Bushings.

UT20843 - Ultratrac P32 Bellcrank Arm Drivers Side (LH) 16k+ GVW (1993+)

Name: P3032 - SuperSteer® Steering Bellcrank for Chevrolet and Workhorse P30/P32 Chassis
Brand: SuperSteer
SKU: P3032
Price: 275.00 USD
Availability: InStock
Rating: 5 (4 reviews)

UT20912 Ultratrac P32 Bellcrank Arm Passenger Side (RH) 16k+ GVW (1993+)

15030310 - Bushing - Upper Control Arm

I just received a spreader bar from you - no problem there - but couldn’t help notice that after I ordered it is now out of stock. No worries there either as obviously I only need one for my application, but looking towards other possible upgrades for the future, I have to ask. Are so many things showing out of stock a temporary situation due to low supplies, or are you not planning to carry some of these items in the near future once they are sold out? I understand if you can’t review that for competitive reasons, just thought I’d ask out of my own personal planning concerns. Thank you! ( Jim Bell, 06/23/2021 )

Out of stock items are purely due to supply chain issues. We do not plan to discontinue carrying any of the products we have listed on our website.

1994 p30 chassis . 454 engine . Alignment wouldnt align it untill idles were changed . What would be going rate for 2 of the bwll crank idler ( Rodney Bluma, 08/24/2019 )

Here is a link to our quick guide which shows all front end steering components: https://www.ultrarvproducts.com/Service-Quick-Guides/Workhorse-GM-P32-Front-End-Rebuild-Kit

What bellcrank do I need for the passenger and the drivers side?

( Tim, 08/21/2015 )

Tim,

The part number that you would need for both sides would be P3032 and here is a direct link to that part on our site. P3032 this is a lifetime replacement part.

I have a 1998 fleetwood south wind with a chevy p32 chassis GVWR is 16,500 Is this bellcrank designed for this year and model? What is the part number that I need for drivers and passenger side The alignment shop said I need the bellcranks replaced before they can do the Alignment Thanks

( Tim, 08/21/2015 )

The P3032 is the correct bellcrank and it is the same both left and right hand side.

Ask a question

Your Name

Your Question

Note: HTML is not translated!

Shipping Notice

In-stock items shipping via ground or flat rate are shipped within 48 hours. Expedited orders are prioritized and ship within 24 hours. Orders placed over the weekend, after Friday’s shipping cutoff, or on designated holidays will be processed on the next business day, and may not ship for up to 48 hours. For more information, please see our shipping terms.

SuperSteer® Steering Bellcrank for Chevrolet and Workhorse P30/P32 Chassis (Part Number P3032)

Available Options

Eliminate Steering Play on Chevy & Workhorse P30/P32 with the SuperSteer® P3032 Bell Crank

The SuperSteer® P3032 Bell Crank is a heavy-duty, precision-engineered upgrade that replaces the weak factory component with a rugged, long-lasting solution built specifically for motorhome applications.

Instead of sleeve bushings, this upgraded part utilizes high-quality tapered roller bearings. These bearings are designed to carry significantly higher loads while maintaining tight tolerances. They can also be adjusted to eliminate end play and side movement, restoring precise steering response.

Applications:

Specifications:

Benefits:

Installation Instructions: