My Cart
26113999 - Engine Oil Cooler Hose Assembly
: 26113999
In Stock(5)
$432.52
$673.29
Engine Oil Cooler Hose Assembly for Workhorse P32, W22 and W24 Chassis
This is a custom made engine oil cooler hose assembly to replace the original discontinued oil cooler hose assembly, part # 15002888. Unlike the original, the components of this hose assembly are a multi-piece modular design so that individual pieces can be replaced as needed. This hose assembly is shipped partially assembled which aids in the ease of installation. The new connection at the engine oil cooler eliminates the need for the special washer style seals that the original hose assembly used. This hose assembly replaces all the original components of the factory installed hose assembly.
Applications:
| Chassis Model | Years | Vehicle Type |
|---|---|---|
| Workhorse P32 | 2001–2005 | Motorhome |
| Workhorse W16 | 2006–2009 | Motorhome |
| Workhorse W18 | 2006–2009 | Motorhome |
| Workhorse W22 | 2001–2006 | Motorhome |
| Workhorse W24 | 2004–2005 | Motorhome |
Specifications:
When installing the engine oil cooler block fitting to the oil cooler:
- Tighten the block fitting bolt to 35 Nm (26 lb ft). (DO NOT OVER-TIGHTEN as it will distort the oil cooler connection block and cause it to leak!!)
Installation Instructions:
The state of California requires that this warning be posted for people purchasing products that reside in California.
WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov
