My Cart
-250x250w.jpg "UPFORD - Ford Ultra RV Tuner")
-250x250w.jpg "UltraPower GM / Workhorse 8.1L Custom Tuning (ECM Only)")
Manufacturer: SuperSteer
Model: 4139-130
***Please verify this is the correct kit for your sway bar by measuring the diameter before placing your order!***Description: Polyurethane bushings are far superior to the factory installed rubber bushings. Unlike rubber, the polyurethane will withstand the test of time and offer a better more..
$279.00 $403.65
In Stock
Manufacturer: SuperSteer
Model: CClimitstrap
Country Coach Limit Strap for use with Koni FSD shocks on Country Coach Chassis.
These straps limit the shock absorber travel on the drive axle of certain Country Coach (typically Magna chassis) motorhomes. IF your coach is equipped with the 9044-1004 90-series Koni FSD shock absorbers, you MUST ..
$287.28 $345.33
In Stock
Manufacturer: SuperSteer
Model: CWM4DEG
CWM4DEG - Monaco Roadmaster Alignment Shim (4 Degree)Description:These shims are designed to fit the front axle of Roadmaster chassis RV's. This shim has a 4 degree profile. ..
$138.63
In Stock
Manufacturer: SuperSteer
Model: P3032
Description:
You may have experienced play in the steering wheel when driving your Chevy or Workhorse chassis motorhome. This play in the steering wheel can often be attributed to the bell crank (or "idler"), which supports the steering linkage. Original equipment designs utilize common sleeve bu..
$275.00 $384.75
In Stock
Manufacturer: SuperSteer
Model: SS100
Special Note: This will only fit if you have a 3 bolt mounting bellcrank. If it has 4 bolts attaching it to the frame rail, then this part will not fit.Description:
Drivers of the Freightliner XC motor home chassis often experience steering play and wander. The steering play can be attribut..
$449.00 $538.65
In Stock
Manufacturer: SuperSteer
Model: SS101
Description:The SuperSteer® SS101 front sway bar is heat treated, offering a stronger alternative to the traditional sway bar upgrade. When heat is applied during manufacturing, the steel hardens and becomes stronger. At 1 3/4" diameter, it is larger than the stock sway bar. For every 1/8" sway bar ..
$995.00 $1,282.50
In Stock
Manufacturer: SuperSteer
Model: SS102
Description:The
SuperSteer® SS102 rear sway bar is a factory replacement. At 2" diameter,
it is larger than the OE sway bar. For every 1/8" sway bar diameter size,
you gain 30% increase in strength. A large improvement for such a small
increase. The sway bar will help eliminate sway and body rol..
$1,200.00 $1,552.50
In Stock
Manufacturer: SuperSteer
Model: SS200F/L
Description:
The SuperSteer Trim Unit provides on-the-fly control over the popular Safe-T-Plus hydraulic steering control unit. The Trim Unit bolts to the Safe-T-Plus device and the motorhome's front axle, allowing the driver to adjust trim at the flip of a switch. Simply correct the wheel in..
$620.00 $877.50
In Stock
Manufacturer: SuperSteer
Model: SS200R/M
Description:
The SuperSteer Trim Unit provides on-the-fly control over the popular Safe-T-Plus hydraulic steering control unit. The Trim Unit bolts to the Safe-T-Plus device and the motorhome's front axle, allowing the driver to adjust trim at the flip of a switch. Simply correct the wheel in t..
$620.00 $877.50
In Stock
Manufacturer: SuperSteer
Model: SS2022F
Description:Fits Ford F53 class A chassis front axle. This bolt, spacer and bracket kit allows for the mounting of four shocks on the front of the 20K-22K GVWR Ford F53 chassis.It is recommended that you ONLY use this kit with Koni FSD 8805-1018 shock absorbers. (This kit does not include shocks)INS..
$256.00 $303.75
In Stock
Manufacturer: SuperSteer
Model: SS2022R
Description:Fits Ford F53 class A chassis rear. This bolt and spacer kit allows for the mounting of four shocks on the rear of the Ford F53 chassis 20K to 22K GVWR.It is recommended that you ONLY use this kit with Koni FSD 8805-1019 shock absorbers. (This kit does not include shocks)INSTALLATION INS..
$96.00 $114.75
In Stock
Manufacturer: SuperSteer
Model: SS2426F
Description:
Fits Ford F53 class A chassis front axle. This bolt, spacer and bracket kit allows for the mounting of four shocks on the front of the Ford F53 chassis.
It is recommended that you ONLY use this kit with Koni FSD 8805-1018 shock absorbers. (This kit does not include shocks)
INSTALLA..
$205.00 $249.75
In Stock
