49542 - Banks Power TorqueTubes Workhorse W-Series 2004+

49542  -  Banks Power TorqueTubes Workhorse W-Series 2004+

PLEASE READ!!!

Order Shipment Notice: 

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Part # 49542

Description:

One look at Banks TorqueTubes tells you how radically different they are from the stock exhaust manifolds. Constructed of heavy-wall, 400-series stainless steel, TorqueTubes have 1/2-inch-thick flanges that are welded on both sides and then machined perfectly flat (no gaskets needed). They never crack, leak or fail.

TorqueTubes tuned-length tubes produce a huge reserve of low-end torque that proves its worth on every steep grade and short onramp. Now your Workhorse climbs faster and stronger, without the transmission struggling between gears. The muscle to stay in higher gears longer not only stops annoying "shift happy" performance, it lessens the load on your engine and transmission. Here's power to reach freeway speed sooner for safe merging and passing.

Applications:

  • 2004+ W-Series Chassis - Allison Transmission
I have your ultrapower tune already, will the tune need to be altered with the install of headers. Is there any noticeable power gain at 3200 rpm or less. I'm not one of those flat footed let'er scream up the hill guys ( Thomas Ressler, 05/02/2019 )
You would notice an appreciable gain in torque under 3200 RPM with the TorqueTube headers. You shouldn't require a re-tune with the headers installed. ( Support )
what kind of power and torq increase can I expect? ( joey, 08/20/2018 )
The TorqueTubes are good for about 25 horsepower and 30 ft-lb. torque. ( Support )
How much to install on a 2006 Newmar Canyon Star on the W22 chassis? ( Damon, 12/08/2016 )

Damon,

Typical installation will be approximately 8 hours. Cost will depend on the labor rate of the shop that you have install it.

( Support )
2006 Bounder 35E (but chassis built 2005) Do your p/n 49542 headers bolt up to the existing exhaust system? I will probably install myself but would like a quote from you for installation.
Thanks
( James Ludwig, 08/01/2016 )

Hi James,

Yes the 49542 is designed to mate up with the stock exhaust pipes without modification. To get an installation quote please call our service facility at 877-786-1576.

( Support )

Ask a question

Note: HTML is not translated!

Write a review

Please login or register to review

 The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Shipping Insurance Notice

NOTICE: For orders outside of United States

If you are placing an order to ship outside the United States, Shipping Insurance will be required and added automatically at checkout.

      

  • $1,713.76
  • $1,269.45